Pollution sources of atmospheric fine particles and secondary aerosol characteristics in Beijing

To investigate the secondary formation and pollution sources of atmospheric particles in urban Beijing, PM_2.5 and its chemical components were collected and determined by URG-9000D ambient ion monitor (AIM) from March 2016 to January 2017. Among water-soluble ions (WSIs), NO₃^-, SO₄^2- and NH₄⁺ (SNA) had the largest proportion (77.8%) with the total concentration of 23.8 μg/m³. Moreover, as fine particle pollution worsened, the NO₃^-, SO₄^2- and NH₄⁺ concentrations increased basically, which revealed that secondary aerosols were the main cause of particle pollution in Beijing. Furthermore, the particle neutralization ratio (1.1), the ammonia to sulfate molar ratio (3.4) and the nitrate to sulfate molar ratio (2.2) showed that secondary aerosols are under ammonium-rich conditions with the main chemical forms of NH₄NO₃ and (NH₄)₂SO₄, and vehicle emission could be the main anthropogenic source of secondary aerosols in Beijing. Source analysis further indicated that secondary aerosols, solid fuel combustion, dust and marine aerosol were the principal pollution sources of PM_2.5, accounting for about 46.1%, 22.4% and 13.0%, respectively, and Inner Mongolia and Hebei Provinces could be considered as the main potential sources of PM_2.5 in urban Beijing. In addition, secondary formation process was closely related with gaseous precursor emission amounts (SO₂, NO₂, NH₃ and HONO), atmospheric ozone concentration (O₃), meteorological conditions (temperature and relative humidity) and particle components. Sensitive analysis of the thermodynamic equilibrium model (ISORROPIA II) revealed that controlling total nitrate (TN) is the effective measure to mitigate fine particle pollution in Beijing.