Design and Validation of Passive Environmental DNA Samplers Using Granular Activated Carbon and Montmorillonite Clay

Environmental DNA (eDNA) analysis is gaining prominence as a tool for species and biodiversity monitoring in aquatic environments. eDNA shed by organisms is captured in grab samples, concentrated by filtration, extracted, and analyzed using molecular methods. Conventional capture and filtration methods are limited because (1) filtration does not capture all extracellular DNA, (2) eDNA can degrade during sample transport and storage, (3) filters often clog in turbid waters, reducing the eDNA captured, and (4) grab samples are time sensitive due to pulse eDNA inputs. To address these limitations, this work designs and validates Passive Environmental DNA Samplers (PEDS). PEDS consist of an adsorbent-filled sachet that is suspended in water to collect eDNA over time. Both extracellular and cellular DNA are captured, and the extracellular DNA is protected from degradation. The eDNA captured over time may be more representative than a grab sample. Two adsorbents, Montmorillonite Clay (MC) and Granular Activated Carbon (GAC), are tested. In laboratory experiments, MC-PEDS adsorbed five times more extracellular DNA and desorbed up to four times more than GAC-PEDS (despite high levels of eDNA loss during desorption). In microcosm and field experiments, GAC-PEDS captured over an order of magnitude more eDNA than MC-PEDS. Field results further validated PEDS as an effective eDNA capture method compared to conventional methods.