Cost analysis and environmental assessment of recycling paint sludge in asphalt pavements

Paint sludge (PS) is a waste product coming from spray application of paints in automotive industry. For the first time, this work assessed the economic costs and environmental impacts connected to recycling PS in bituminous binders for asphalt pavement applications. Previous works have demonstrated that PS could be used as a replacement of up to 20% (w/w) of neat bitumen in the production of hot mixture asphalts (HMAs), without worsening the technical performances of pavements. The annual production of PS from Italian automotive plants (3000 t/year) could be accommodated in a paved area of 1.64 km² that, when employed in local roads, with an average width of 5 m, corresponds to approximately 330 km. Costs for treating PS to be prepared for recycling resulted in 144 €/t raw PS. This cost was of the same order, or even less, of that required for PS incineration or disposal in a landfill for hazardous waste (250-300 €). The LCA analysis revealed that the production of HMAs by employing a binder that contains 20% (w/w) of PS, reduced the gross energy requirement (GER) and global warming potential (GWP) indexes by 15% and 39%, respectively, compared to an HMA produced with the traditional process.