Heterogeneous Non-noble Catalyst for Highly Selective Production of Linear α-Olefins from Fatty Acids: A Discovery of
Zihao Zhang1,2, Wenwen Lin1,2, Yafei Li1
1Key Laboratory of Biomass Chemical Engineering of Ministry of Education, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310027, P. R. China.
Abstract:
Catalytic deoxygenation of even-numbered fatty acids into odd-chain linear α-olefins (LAOs) has emerged as a complementary strategy to oligomerization of ethylene, which only affords even-chain LAOs. Although enzymes and homogeneous catalysts have shown promising potential for this application, industrial production of LAOs through these catalytic systems is still very difficult to accomplish to date. A recent breakthrough involves the use of an expensive noble-metal catalyst, Pd/C, through a phosphine ligands-assisted method for LAOs production from fatty acid conversion. This study presents a unique, cost-friendly, non-noble bimetallic NiFe/C catalyst for highly selective LAOs production from fatty acids through decarbonylative dehydration. In the presence of acetic anhydride and phosphine ligand, a remarkable improvement in the yield of 1-heptadecene from the conversion of stearic acid was found over the supported bimetallic catalyst (NiFe/C) as compared to corresponding monometallic counterparts (Ni/C and Fe/C). Through optimization of the reaction conditions, a 70.1 % heptadecene yield with selectivity to 1-heptadecene as high as 92.8 % could be achieved over the bimetallic catalyst at just 190 °C. This unique bimetallic NiFe/C catalyst is composed of NiFe alloy in the material bulk phase and a surface mixture of NiFe alloy and oxidized NiFeδ+ species, which offer a synergized contribution towards decarbonylative dehydration of stearic acid for 1-heptadecene production.
More Related Videos
Related Concept Videos
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Ziegler–Natta Chain-Growth Polymerization: Overview
α-Alkylation of Ketones via Enolate Ions
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists of a...


