Related Experiment Video
Updated: Dec 14, 2025

Monolayer Contact Doping of Silicon Surfaces and Nanowires Using Organophosphorus Compounds
Published on: December 2, 2013
Enhancing the lateral current injection by modulating the doping type in the p-type hole injection layer for
Abstract:
In this report, we propose GaN-based vertical cavity surface emitting lasers with a p-GaN/n-GaN/p-GaN (PNP-GaN) structured current spreading layer. The PNP-GaN current spreading layer can generate the energy band barrier in the valence band because of the modulated doping type, which is able to favor the current spreading into the aperture. By using the PNP-GaN current spreading layer, the thickness for the optically absorptive ITO current spreading layer can be reduced to decrease internal loss and then enhance the lasing power. Furthermore, we investigate the impact of the doping concentration, the thickness and the position for the inserted n-GaN layer on the lateral hole confinement capability, the lasing power, and the optimization strategy. Our investigations also report that the optimized PNP-GaN structure will suppress the thermal droop of the lasing power for our proposed VCSELs.
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
P-N junction

