Related Experiment Video
Updated: Dec 14, 2025

Determining Viral Disinfection Efficacy of Hot Water Laundering
Published on: June 21, 2022
Decontaminating N95 and SN95 masks with ultraviolet germicidal irradiation does not impair mask efficacy and safety
K O'Hearn1, S Gertsman1, M Sampson2
1Children's Hospital of Eastern Ontario Research Institute, Ottawa, ON, Canada.
Abstract:
Inadequate supply of filtering facepiece respirators (FFRs) for healthcare workers during a pandemic such as the novel coronavirus outbreak (SARS-CoV-2) is a serious public health issue. The aim of this study was to synthesize existing data on the effectiveness of ultraviolet germicidal irradiation (UVGI) for N95 FFR decontamination. A systematic review (PROSPERO CRD42020176156) was conducted on UVGI in N95 FFRs using Embase, Medline, Global Health, Google Scholar, WHO feed, and MedRxiv. Two reviewers independently determined eligibility and extracted predefined variables. Original research reporting on function, decontamination, or mask fit following UVGI were included. Thirteen studies were identified, comprising 54 UVGI intervention arms and 58 N95 models. FFRs consistently maintained certification standards following UVGI. Aerosol penetration averaged 1.19% (0.70-2.48%) and 1.14% (0.57-2.63%) for control and UVGI arms, respectively. Airflow resistance for the control arms averaged 9.79 mm H2O (7.97-11.70 mm H2O) vs 9.85 mm H2O (8.33-11.44 mm H2O) for UVGI arms. UVGI protocols employing a cumulative dose >20,000 J/m2 resulted in a 2-log reduction in viral load. A >3-log reduction was observed in seven UVGI arms using >40,000 J/m2. Impact of UVGI on fit was evaluated in two studies (16,200; 32,400 J/m2) and no evidence of compromise was found. Our findings suggest that further work in this area (or translation to a clinical setting) should use a cumulative UV-C dose of 40,000 J/m2 or greater, and confirm appropriate mask fit following decontamination.
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
PPE Use in Healthcare Settings II: Doffing
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Administering Oxygen by Mask
Administering oxygen by mask is a common nursing intervention that provides supplemental oxygen to patients with respiratory distress or chronic lung conditions. This procedure involves delivering oxygen at a specified rate through a face mask connected to an oxygen source.
Equipment
The equipment necessary for this procedure includes:

