Related Experiment Video
Updated: Dec 14, 2025

The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids
Published on: September 30, 2014
Oil Conductivity, Electric-Field-Induced Interfacial Charge Effects, and Their Influence on the Electro-Optical
Chengdian Jiang1, Biao Tang1, Bojian Xu1,2
1Guangdong Provincial Key Laboratory of Optical Information Materials and Technology & Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou 510006, China.
Abstract:
A pixel in an electrowetting display (EWD) can be viewed as a confined water/oil two-phase microfluidic system that can be manipulated by applying an electric field. The phenomenon of charge trapping in the protective dielectric and conductivity of the oil phase reduce the effective electric field that is required to keep the three-phase contact line (TCL) in place. This probably leads to an oil-backflow effect which deteriorates the electro-optical performance of EWD devices. In order to investigate charge trapping and conduction effects on the device electro-optical response, an EWD device was studied, which was fabricated with a black oil, aiming for a high-contrast ratio and color-filter display. For comparison, we also prepared a device containing a purple oil, which had a lower electrical conductivity. As anticipated, the black-oil device showed faster backflow than the purple-oil device. A simple model was proposed to explain the role of oil conductivity in the backflow effect. In addition, the rebound and reopening effects were also observed after the voltage was switched to zero. The above observations were strongly dependent on polarity. By combining observations of the polarity dependence of the oil conductivity and assuming that negative charges trap more strongly in the dielectric than positive charges, our experimental results on rebound and reopening can be explained. In the AC optical response, the pixel closing speed decreased in time for intermediate frequencies. This is likely related to the phenomenon of charge trapping. It was also found that the periodic driving method could not suppress the backflow effect when the driving frequency was above ~10 kHz. Our findings confirm the significance of the above charge-related effects of EWD devices, which need to be investigated further for better understanding in order to properly design/use materials and driving schemes to suppress them.
Related Concept Videos
Electrical Conductivity
In a practical conductor, an applied electric field may be sustained, causing a flow of electrons, which produce a current. The differential form of the current, the current density, is related to the electric field.
More generally, it is related to the force per unit charge, which involves the...
Induced Electric Fields: Applications
Design Example: Resistive Touchscreen
When a user touches the screen, the two layers make contact at a specific point known as the touchpoint. This contact reduces the resistance between...
Dielectric Polarization in a Capacitor
Electrostatic Boundary Conditions in Dielectrics
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's permittivity....
Electric Field of Parallel Conducting Plates
Consider a cross-section of a thin, infinite conducting plate having a positive charge. For such a large thin plate, as the thickness of the plate tends to zero, the positive charges lie on the plate's two large faces. Without an external electric field, the...

