Study on the adsorption of polystyrene microplastics by three-dimensional reduced graphene oxide

In this paper, a study on the removal of imitated polystyrene (PS) microplastics in water was carried out based on the adsorption capacity of three-dimensional reduced graphene oxide (3D RGO). Scanning electron microscopy and X-ray diffractometry characterization showed that the freeze-dried 3D RGO formed a distinct porous spatial structure. Different experimental parameters, such as pH, ion concentration (C₀), contact time (t), and temperature (T), were studied to investigate the PS microplastic adsorption performance of 3D RGO. The adsorption mechanism was mainly attributed to the strong π-π interaction between the carbon ring of 3D RGO and the benzene ring of PS microplastics. Sorption kinetic and isothermal data were obtained by the well-fitted Langmuir adsorption isotherm model and pseudo-second-order kinetic model. Furthermore, the result of thermodynamic analysis showed that the adsorption of PS microplastics was a spontaneous endothermic process. Under the optimal conditions of pH = 6, C₀ = 600 mg/L, t = 120 min, and T = 26 °C, the maximum adsorption capacity of the prepared 3D RGO on PS microplastics was 617.28 mg/g. Furthermore, this method exhibited good feasibility in tap water and lake water.