Related Experiment Video
Updated: Dec 13, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Comparative study on inorganic Cl removal of municipal solid waste fly ash using different types and concentrations
Xiaona Wang1, Menglu Wang1, Dezhi Zou1
1Department of Environmental Engineering, School of Energy and Environmental Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing, 100083, China.
Abstract:
In this study, different organic acids-such as citric, acetic, lactic, propionic, and butyric acid-were evaluated to ascertain the optimum leaching solvent for dechlorinating fly ash. Results suggest that the acid type, concentration, and interactions between both parameters contributed significantly to the variations in the efficiency of fly ash dechlorination. Simple main-effect analysis suggested that a higher acid concentration yields better dechlorination efficiency. However, improvements in dechlorination efficiency did not necessarily yield a low chlorine content leaching residue because in a specific acid concentration region, the increased acid concentration may also accelerate the mass reduction rate of the leaching residue. Experimental results also demonstrate that citric and acetic acid yield the highest dechlorination efficiency, followed by propionic and butyric acid. The least dechlorination efficiency of lactic acid could be attributed to the formation of precipitate (i.e. calcium lactate) which might cover the chlorides and reduce the contact area of intimal chlorides with the leaching solvent. Therefore, a specific concentration of organic matter fermentation broth rich in citric and acetic radicals may present itself as an ideal water substitute for fly ash dechlorination.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Extraction: Advanced Methods
Carboxylic Acids to Acid Chlorides
Mixtures of Acids
A Mixture of a Strong Acid and a Weak Acid
In a mixture of a strong acid and a weak acid, the strong acid dissociates completely and becomes a source of almost all the hydronium ions...
Preparation of Acid Anhydrides
The carboxylate ion acts as a nucleophile that attacks the carbonyl carbon of the acid chloride to form a tetrahedral intermediate. Subsequently, the re-formation of the carbonyl group with the loss of the chloride ion as a leaving group leads to the formation of an acid...

