Related Experiment Video
Updated: Dec 13, 2025

Author Spotlight: Microbial Control and Monitoring Strategies for Cleanroom Environments and Cellular Therapies
Published on: March 17, 2023
Air bio-contamination control in hospital environment by UV-C rays and HEPA filters in HVAC systems
1Department of Astronautical Electrical and Energy Engineering, Sapienza University of Rome, Italy.
Abstract:
The contamination of air-handling units is a widespread phenomenon in buildings with air-conditioning systems, including hospitals. The germicide capacity of UV-C rays is known and, in the air-conditioning apparatuses, the UV-C lamps are generally located inside the air ducts. Aim of the paper is to evaluate the effectiveness of UV-C lamps when they are differently placed, i.e. in a position to directly irradiate the HEPA filters surface. We built ad hoc experimental air-conditioning systems, with HEPA filters and UV-C lamps in the two described positions. The results obtained demonstrate that, for disinfection purpose, the direct irradiation of the HEPA filters by UV-C provides better results than irradiation of the air stream and the effectiveness increases when lowering the relative humidity of the air. The survival curves of the tested microorganisms (fungi) show typical tail shaped curves (two steps survival curves). Additional tests using both HEPA filters alone, and HEPA filters plus UV lamps, have been performed measuring the air pressure drop between entrance and exit the HEPA filters and collecting air samples in order to obtain total microbial and fungal count. The results obtained suggest that, at least in experimental conditions described, the radiation on filter surface reduces significantly the microbial load and the pressure drop through the filter, compared to a situation of not-irradiated HEPA filters.
Related Concept Videos
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Healthcare Associated Infections II: Preventive Measures
The best practices for preventing healthcare-associated infections include hand hygiene, patient risk...
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...

