Related Experiment Video
Updated: Dec 13, 2025

Quantification of Fungal Colonization, Sporogenesis, and Production of Mycotoxins Using Kernel Bioassays
Published on: April 23, 2012
Rapid and Quantitative Detection of Aflatoxin B1 in Grain by Portable Raman Spectrometer
Sheng-Hong Liu1, Bao-Ying Wen1, Jia-Sheng Lin1
1State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, 12466Xiamen University, Xiamen, China.
Abstract:
Many foodstuffs are extremely susceptible to contamination with aflatoxins, in which aflatoxin B1 is highly toxic and carcinogenic. Therefore, it is crucial to develop a rapid and effective analytical method for detecting and monitoring aflatoxin B1 in food. Herein, a surface-enhanced Raman spectroscopic (SERS) method combined with QuEChERS (quick, easy, cheap-effective, rugged, safe) sample pretreatment technique was used to detect aflatoxin B1. Sample preparation was optimized into a one-step extraction method using an Au nanoparticle-based solution (Au sol) as the SERS detection substrate. An affordable portable Raman spectrometer was then used for rapid, label-free, quantitative detection of aflatoxin B1 levels in foodstuffs. This method showed a good linear log relationship between the Raman signal intensity of aflatoxin B1 in the 1-1000 µg L-1 concentration range with a limit of detection of 0.85 µg kg-1 and a correlation coefficient of 0.9836. Rapid aflatoxin B1 detection times of ∼10 min for wheat, corn, and protein feed powder samples were also achieved. This method has high sensitivity, strong specificity, excellent stability, is simple to use, economical, and is suitable for on-site detection, with good prospects for practical application in the field of food safety.
More Related Videos
09:21Inhibition of Aspergillus flavus Growth and Aflatoxin Production in Transgenic Maize Expressing the α-amylase Inhibitor from Lablab purpureus L.
Published on: February 15, 2019
08:13A Filter-based Surface Enhanced Raman Spectroscopic Assay for Rapid Detection of Chemical Contaminants
Published on: February 19, 2016
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...