Related Experiment Video
Updated: Jul 20, 2026

Biofilm Removal Using Carbon Dioxide Aerosols without Nitrogen Purge
Published on: November 6, 2016
National Institute of Standards and Technology transportable tunable ultraviolet laser irradiance facility for water
1National Institute of Standards and Technology, Gaithersburg, Maryland 20899, USA.
Abstract:
A method of ultraviolet germicidal irradiation (UVGI) for water pathogen inactivation effectiveness using tunable, narrowband laser light is described. A transportable tunable UV (TTUV) laser system for providing a known irradiance (microW/cm2) or dose (mJ/cm2) suitable for irradiating water samples in Petri dishes over the wavelength range of 210 nm-300 nm was developed by the National Institute of Standards and Technology. The TTUV facility, consisting of a 1 kHz pulsed UV laser and light-tight enclosure containing the optics necessary to uniformly irradiate a water sample, was used in a microbiology laboratory to dose drinking water pathogens and surrogates as part of a Water Research Foundation study in the summer and fall of 2012. The approach demonstrated improved accuracy and simplified spectral analysis over conventional pathogen inactivation sources consisting of broadband UV sources and bandpass filters. In this work, the TTUV facility design and key components are described, including modifications in the field to provide the required irradiance levels. The irradiance and dose levels produced by the tunable UV laser during the project are also presented. The transportability of the TTUV system enabled it to be brought to a microbiology facility allowing the water samples (microbial suspensions) to be irradiated in a location with experienced staff and facilities for preparing, handling, analyzing, storing, and shipping the many samples studied. These results, published elsewhere, established that the tunable UV laser system provides unique UVGI capabilities for use with water pathogens and has applications for other pathogen experiments, for example, air-purification studies.
Related Concept Videos
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration

