Development of a multi-color gas puff imaging diagnostic on HL-2A tokamak

A Multi-Color (MC) gas puff imaging diagnostic has been developed on HL-2A tokamak. This diagnostic can simultaneously measure two-dimensional (2D, radial, and poloidal) electron density and temperature distributions with a good spatial resolution of 2.5 × 2.5 mm² and a temporal resolution of about 100 µs at best in edge plasmas. The 2D electron density and temperature distributions are inferred from the ratios of intensities of three different neutral helium emission lines; therefore, it is also referred to as helium beam probe or beam emission spectroscopy on thermal helium. A compact light splitter is used to split the inlet visible emission beam into four channels, and the specific neutral helium lines of the wavelengths λ₁ = 587.6 nm, λ₂ = 667.8 nm, λ₃ = 706.5 nm, and λ₄ = 728.1 nm are measured, respectively. This MC diagnostic has been experimentally tested and calibrated on a linear magnetic confinement device Peking University Plasma Test device, and the measured 2D electron density and temperature distributions are compared with the Langmuir probe measurements.