Retention of atenolol from single and binary aqueous solutions by thin film composite nanofiltration membrane:...

The performance of a polyamide-based thin-film composite nanofiltration (NF) membrane (NF33) was investigated for the retention of atenolol, a pharmaceutical pollutant, from the single and binary aqueous solutions. The effect of pH, applied pressure, feed flux, initial atenolol (ATN) concentration, and different co-existing salts with varying concentrations were studied to test the performance of the membrane. The removal efficiency of ATN increased with increasing solution pH giving the highest retention (70.9 ± 3.1) at pH 9, which was slightly decreased with the increasing initial ATN concentration but increased with increasing applied pressure and feed flux. As per the uncharged solutes rejection concept, the average pore radius of NF membrane for slit-like and cylindrical pore geometries were, respectively 0.169 ± 0.003 and 0.264 ± 0.009 nm. The Spiegler-Kedem model could predict the performance of NF membrane by retaining ATN over the investigated range of feed flux. The calculated reflection coefficient (σ) was close to unity, demonstrating the convective transport. Addition of CaCl₂ as a co-existing salt into the feed showed promoting effect on ATN retention, and its efficiency was lowered by the addition of NaCl and Na₂SO₄ salts. As per the cost analysis, the total annualized cost of treatment by the NF was found to be 0.53 $/m³.