Related Experiment Video
Updated: Dec 11, 2025
Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner
Published on: October 25, 2017
Simultaneous removal of SO2 and NO using a spray dryer absorption (SDA) method combined with O3 oxidation for
Maoyu Cai1, Xiaolong Liu2, Tingyu Zhu3
1School of Chemistry and Chemical Engineering, Guizhou University, Guiyang 550025, China.
Abstract:
Based on the demand of sintering/pelleting flue gas ultra-low emission, a semi-dry method using a spray dryer absorber (SDA) combined with O3 oxidation was proposed for simultaneous removal of SO2 and NO. Effects of O3 injection site, O3/NO molar ratio, and spray tower temperature on the removal efficiencies were investigated. It was revealed that both desulfurization and denitrification efficiencies could reach to 85% under the conditions of setting O3 injection site inside of tower, O3/NO molar ratio 1.8, spray tower temperature 85°C, Ca/(S + 2 N) molar ratio 2.5 and slurry flow rate 300 mL/hr. CaSO3/Ca(OH)2 mixture slurry was used as absorbent to simulate operating conditions in iron and steel industry. The result shows that the addition of CaSO3 weakens both removal efficiencies. In addition, the reaction mechanism of simultaneous removal of SO2 and NO using SDA combined with O3 oxidation was proposed.
More Related Videos
08:00Author Spotlight: Standardizing the Development of Amine-Based Silica Composites as CO2 Adsorbents for Direct Air Capture
Published on: September 29, 2023
11:47The Effect of Interfacial Chemical Bonding in TiO2-SiO2 Composites on Their Photocatalytic NOx Abatement Performance
Published on: July 4, 2017
Related Concept Videos
01:08Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
01:25Atomic Absorption Spectroscopy: Atomization Methods