A Study on Explosion Separation Technology of Carbon Fiber Reinforced Epoxy Resin-Based Composite Laminate

In an aeroengine casing containment experiment, in order to explode and separate unidirectional carbon fiber reinforced epoxy resin-based laminate, with uneven thickness, without excessive residual speed and fragment spattering, blades were subjected to three types of blasting and cutting pretests, including normal and lateral opening charge explosive tests on the laminate and linear charge-shaped jet cutting. The linear charge-shaped method was found to be the most suitable method for separating the laminate. The finite-element analysis program AUTODYN was used to simulate and optimize the effect of shaped jet cutting. When the explosive height of the shaped jet cutter was set to 90 mm, the laminate broke with the least number of fragments and the residual velocity of the plate was the smallest. At this time, we obtained the relationship between the total amount of explosive and the thickness of the composite plate when the composite plates of different thicknesses were just broken, and the rationality of the relationship was verified by experiments. The research method, in this paper, provides a reference scheme to design explosive separation composite materials in complex engineering environments.