C9 Petroleum Resin Hydrogenation over a PEG1000-Modified Nickel Catalyst Supported on a Recyclable Fluid Catalytic
Ming Jiang1, Xiaojie Wei1,2, Xiaopeng Chen1,2
1School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004, PR China.
Abstract:
A PEG1000-modified nickel-based catalyst (Ni-PEG1000/FC3R) supported on an activated fluid catalytic cracking catalyst residue (FC3R) was synthesized and applied to C9 petroleum resin (C9PR) hydrogenation. The results of the Brunauer-Emmett-Teller method, X-ray diffraction, H2 temperature-programmed reduction, and scanning electron microscopy-energy-dispersive X-ray spectroscopy show that the Ni-PEG1000/FC3R catalyst had a smaller crystallite size and higher Ni dispersion than those of a Ni/FC3R catalyst. The prepared Ni-PEG1000/FC3R catalyst was applied in a hydrogenation of C9PR at 270 °C and 6 MPa H2 pressure for 3 h. Under these conditions, the bromine value of C9PR was decreased from 46.1 g Br/100 g (Gardner color grade no. 11) to 0.72 g Br/100 g (Gardner color grade no. 1), and the sulfur content was reduced from 25.7 to 1.66 mg kg-1. Experimental results show that the Ni-PEG1000/FC3R catalyst exhibited high activity and stability for C9PR hydrogenation.
More Related Videos
11:28Biomass Conversion to Produce Hydrocarbon Liquid Fuel Via Hot-vapor Filtered Fast Pyrolysis and Catalytic Hydrotreating
Published on: December 25, 2016
11:33Laboratory Production of Biofuels and Biochemicals from a Rapeseed Oil through Catalytic Cracking Conversion
Published on: September 2, 2016
Related Concept Videos
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Catalysis
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists of a...
