Related Experiment Video
Updated: Dec 10, 2025

A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure
Published on: February 20, 2019
An Eco-friendly Porous Nanocomposite Fabric-Based Triboelectric Nanogenerator for Efficient Energy Harvesting and
Zhiqing Bai1, Yunlong Xu1, Jiecong Li1
1Key Laboratory of Textile Science and Technology, Ministry of Education, College of Textiles, Donghua University, Shanghai 201620, China.
Abstract:
A wearable and effective tribopositive material, especially an economical and eco-friendly triboelectric fabric developed from biomaterials, is highly crucial for the development of green wearable triboelectric nanogenerators. In this work, we design a porous nanocomposite fabric (PNF) with strong charge accumulation capacity through a facile dry-casting method and use it as a tribopositive material to construct attractive wearable triboelectric nanogenerators (abbreviated as TENGs). Specifically, the porous nanocomposite is developed by the incorporation of nano-Al2O3 fillers into cellulose acetate networks. By adjusting the concentration of casting solution and the content of nano-Al2O3 fillers, we systematically engineer the physical properties of the PNF for obtaining a large triboelectric charge yield. When a 10 wt % solution concentration and 10 wt % nanofiller content are adopted for the PNF, the corresponding PNF-TENG can deliver an electrical performance of ∼2.5 mW/cm2 on a 0.8 MΩ external resistor. This remarkable output can be ascribed to the synergistic effect between the appropriate porous network and improved dielectric properties of the nanocomposite. Moreover, the PNF-TENG also exhibits good reliable electrical outputs under multiple stain-washing measurements or after experiencing cyclical contact-separation 13,500 times. Also, the device is capable of charging various capacitors, lighting LED arrays, and driving commercial wrist watches and is proven to be an efficient and reliable green wearable power source. Furthermore, a PNF-TENG-based elbow supporter and a grip ball, as self-powered sensors, are proposed to realize real-time detection for human actions during sports exercise. This work proposes an eco-friendly nanocomposite fabric as an effective tribopositive material, verifies the feasibility of developing environmentally friendly wearable power sources and sensors, and provides new insights into the design of green wearable triboelectric nanogenerators.
More Related Videos
10:39Preparation of ZnO Nanorod/Graphene/ZnO Nanorod Epitaxial Double Heterostructure for Piezoelectrical Nanogenerator by Using Preheating Hydrothermal
Published on: January 15, 2016
06:21A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles
Published on: March 13, 2017