Sequentially recover heavy metals from smelting wastewater using bioelectrochemical system coupled with...

Smelting wastewater is characterized with high concentration of toxic heavy metals and high acidity, which must be properly treated before discharge. Here, bioelectrochemical system (BES) coupled with thermoelectric generator (TEG) was first demonstrated to simultaneously treat organic wastewater and smelting wastewater by utilizing the simulated waste heat that was abundant in smelting factories. By modulating the input voltage generated from simulated waste heat via TEG to 0, 1.0 and 2.0 V, almost all the Cu²⁺, Cd²⁺ and Co²⁺ in smelting wastewater were sequentially recovered with a respective rate of 121.17, 158.20 and 193.87 mg L^-1 d^-1. Cu²⁺ was bioelectrochemically recovered as Cu⁰. While, Cd²⁺ and Co²⁺ were recovered by electrodeposition as Cd(OH)₂, CdCO₃ or Co(OH)₂ on cathodic surface. High throughput sequencing analysis showed that the microbial community of anodic biofilm was greatly shifted after successive treatment by batch-mode. Desulfovibrio (17.00%), Megasphaera (11.81%), Geobacter (10.36%) and Propionibacterium (8.64%) were predominant genera in anodic biofilm enriched from activated sludge in BES before treatment. After successive treatment by batch-mode, Geobacter (34.76%), Microbacter (8.60%) and Desulfovibrio (5.33%) were shifted as the major genera. Economic analysis revealed that it was feasible to use TEG to substitute electrical grid energy to integrate with BES for wastewater treatment. In addition, literature review indicated that it was not uncommon for the coexistence of waste heat with typical pollutants (e.g. heavy metal ions and various biodegradation-resistant organic wastes) that could be treated by BES in different kinds of factories or geothermal sites. This study provides novel insights to expand the application potentials of BES by integrating with TEG to utilize widespread waste heat.