Modeling and Optimization of Time-Of-Use Electricity Pricing Systems

Ying-Chao Hung1, George Michailidis2

  • 1Department of Statistics, National Chengchi University, Taipei, 11605 Taiwan.

IEEE Transactions on Smart Grid
|September 1, 2020
PubMed

Related Concept Videos

Maximum Power Flow and Line Loadability01:23

Maximum Power Flow and Line Loadability

The maximum power flow for lossy transmission lines is derived using ABCD parameters in phasor form. These parameters create a matrix relationship between the sending-end and receiving-end voltages and currents, allowing the determination of the receiving-end current. This relationship facilitates calculating the complex power delivered to the receiving end, from which real and reactive power components are derived.
502
Fast Decoupled and DC Powerflow01:24

Fast Decoupled and DC Powerflow

The fast decoupled power flow method addresses contingencies in power system operations, such as generator outages or transmission line failures. This method provides quick power flow solutions, essential for real-time system adjustments. Fast decoupled power flow algorithms simplify the Jacobian matrix by neglecting certain elements, leading to two sets of decoupled equations:
630
The Power Flow Problem and Solution01:26

The Power Flow Problem and Solution

Power flow problem analysis is fundamental for determining real and reactive power flows in network components, such as transmission lines, transformers, and loads. The power system's single-line diagram provides data on the bus, transmission line, and transformer. Each bus k in the system is characterized by four key variables: voltage magnitude Vk​, phase angle δk​, real power Pk​, and reactive power Qk​. Two of these four variables are inputs, while the power flow program computes...
683
Mathematical Modeling: Problem Solving01:29

Mathematical Modeling: Problem Solving

Mathematical modeling transforms real-world scenarios into mathematical expressions, allowing for structured problem-solving and analysis. This process involves defining the situation, assigning variables to measurable quantities, selecting an appropriate model, and solving the resulting equation. Such models are invaluable in finance, providing precise methods to evaluate investments, loans, and repayment structures.A widely used example is the calculation of fixed monthly payments on a loan,...
163
Control of Power Flow01:30

Control of Power Flow

There are several methods to control power flow in power systems:
583
Transformers with Off-Nominal Turns Ratios01:25

Transformers with Off-Nominal Turns Ratios

In scenarios involving parallel transformers with disparate ratings, developing per-unit models requires accommodating off-nominal turns ratios. This situation arises when the selected base voltages are not proportional to the transformer’s voltage ratings. Consider a transformer where the rated voltages are related by the term a. If the chosen voltage bases satisfy a relationship involving term b, term c is defined as the ratio of these bases. This ratio is then substituted into the...
430