Related Experiment Video
Updated: Dec 9, 2025

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Characterization of sub-nanosecond pulsed laser amplification with Er:Yb co-doped phosphate glass fibers
Abstract:
We present an experimental characterization of the amplification of sub-nanosecond duration laser pulses at a wavelength of 1538 nm in short custom-made Er:Yb phosphate glass fibers with different core diameters. The fibers vary in their diameter from 100 µm (highly multi-mode) down to 12 µm (single-mode). The peak power, energy per pulse, and spectral shape of the amplified signal are presented. With our input pulses, the measurements show that the large core diameter fibers do not increase the amplification of the 1538 nm signal. We believe this is due to the high re-absorption of the Er3+ ions in the phosphate fiber. The optimal fiber geometry was found to have a core diameter of 20 µm with a length of 14 cm. The maximum peak power is 8.25 kW, corresponding to a net gain of 10.9 dB, with a pulse duration of 0.7 ns and a repetition rate of 40 kHz.
More Related Videos
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
13:02Fabrication of 1-D Photonic Crystal Cavity on a Nanofiber Using Femtosecond Laser-induced Ablation
Published on: February 25, 2017