Related Experiment Video
Updated: Dec 8, 2025
Characterizing Electron Transport through Living Biofilms
Published on: June 1, 2018
Comparison analysis on simultaneous decolorization of Congo red and electricity generation in microbial fuel cell
Chao Li1,2, Miaomiao Luo1,2, Shihua Zhou3
1Key Laboratory of Integrated Regulation and Resource Development on Shallow Lakes, Ministry of Education, Hohai University, Nanjing, 210098, China.
Abstract:
L-Threonine and three kinds of conductive polymers were applied for anode modification in microbial fuel cells (MFCs) for decolorization of Congo red with simultaneous electricity generation. The description of modified anodes with FTIR, surface contact angle, and CV analysis showed that the anode surface was successfully grafted with functional groups, with improving wettability, as well as the increasing specific surface area and electrochemical activity. For L-threonine modification, the highest decolorization rate of 97% of the MFC, and meanwhile, the maximum current density of 155.8 mA/m2, was obtained at the modified concentration of 400 mg/L. For conductive polymer modifications, the poly (aniline-1,8-diaminonaphthalene) (short for PANDAN) owned the highest performance, with the current density 185 mA/m2, and the decolorization rate was 97%. Compared with L-threonine, the modifications by conductive polymers were more suitable for MFC decolorization due to their functional groups and unique conductivity. In addition, high-throughput sequencing analysis was conducted for the conductive polymers modified anodes to reveal their bioelectrochemical mechanisms.
