Investigating the Rheological Properties of Carbon Nanotubes/Polymer Composites Modified Asphalt

The utilization of nanomaterials in the field of binder materials for road paving has attracted researchers' attention in recent years. This study presented the performance properties of a binder modified with carbon nanotubes (CNT) and polyethylene (PE). The rheological properties, adhesion behavior, morphology, and storage stability of the modified asphalt were investigated. Experimental analysis indicated a positive effect of CNT/PE composites on the performance of the binder. The results indicate that the combined use of CNT and PE shows a significant enhancement on complex modulus, viscosity, and creep recovery of the binder at high temperatures and a great decrease in compliance, indicating great resistance to permanent deformation. Meanwhile, only using CNT to improve the high temperature performance of the binder is limited due to high shear mixing. CNT/PE modifiers enhance the cracking resistance at low temperatures and moisture damage resistance. The CNT/PE melt mixing composites endow asphalt with stronger cracking resistance, better resistance to moisture damage and workability. Asphalt with CNT/PE composites formed an even dispersion system. Notably, CNT bridges on the interface between PE phase and asphalt for the two modified asphalts, which reinforces the cohesion of interface. Asphalt with CNT/PE composites showed improved storage stability in comparison with PE modified asphalt.