Related Experiment Video
Updated: Dec 8, 2025

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Red mud-enhanced magnesium phosphate cement for remediation of Pb and As contaminated soil
Lei Wang1, Liang Chen2, Binglin Guo3
1Institute of Construction Materials, Technische Universität Dresden, 01062, Dresden, Germany; Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China.
Abstract:
Lead (Pb) and arsenic (As) contaminated soil poses severe threats to human health. This study proposes a novel approach for synchronous stabilisation/solidification (S/S) of Pb and As contaminated soil and explains the immobilisation mechanisms in red mud-modified magnesium phosphate cement (MPC). Experimental results show that incorporation of red mud in MPC binder retarded over-rapid reaction and enhanced compressive strength via the formation of (Al,Fe,K)PO4·nH2O compounds as indicated by X-ray diffractometer (XRD) and elemental mapping. The presence of Pb had a marginal effect on the MPC reaction; however, the presence of As suppressed the generation of MgKPO4·6H2O, leading to a significant delay of setting time and a reduction of compressive strength. Extended X-ray absorption fine structure (EXAFS) analysis proved that Pb2+ strongly coordinated with the PO43-, whereas AsO2- gently coordinated with K+. The MPC binder displayed an excellent immobilisation efficiency for Pb (99.9%), but was less effective for As. The use of red mud enhanced the As immobilisation efficacy to 80.5% due to strong complexation between AsO2- and Fe3+. The treated soils fulfilled requirements of metal(loid) leachability and mechanical strength for on-site reuse. Therefore, red mud-modified MPC can be an effective binder for sustainable remediation of Pb and As contaminated soil.
More Related Videos
Related Concept Videos
Extraction: Advanced Methods
Bioremediation
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...
Masking and Demasking Agents
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...
Corrosion of Reinforcement
However, over time and under certain conditions like carbonation, chloride ingress, and cracking this protective state can be compromised. Steel has areas with...

