Related Experiment Video
Updated: Dec 8, 2025
A Tandem Liquid Chromatography–Mass Spectrometry-based Approach for Metabolite Analysis of Staphylococcus aureus
Published on: March 28, 2017
Evaluation of Methods for Sampling of Staphylococcus aureus and Other Staphylococcus Species from Indoor Surfaces
Anne Mette Madsen1, Hoang U T Phan1, Mathias Laursen1
1National Research Centre for the Working Environment, Lersø Parkallé, Copenhagen Ø, Denmark.
Objectives:
Methicillin-resistant Staphylococcus aureus (MRSA) is an increasing public and occupational health concern. As transmission of MRSA can occur via contact with fomites, it is crucial to have sensitive methods for sampling of bacteria. The overall aim of this study was to obtain knowledge about methods and strategies for quantitative sampling Staphylococcus species on surfaces.
Methods:
The study was designed as a comparative sampling experiment with different samplers [dipslide (two agar types), swabs (three brands, used wet and dry, and elution from swabs or plate diluted)] on smooth stainless steel surfaces spiked with MRSA and methicillin-sensitive S. aureus (MSSA). Furthermore, bacteria sampled from indoor surfaces with frequent or infrequent contact with hands were quantified and identified using matrix-assisted laser desorption-ionization time-of-flight (MALDI-TOF) mass spectrometry (MS).
Results:
Pre-moistened swabs in combination with dilution plating and dipslides were more sensitive than dry swabs. For recovery of MRSA and MSSA from surfaces with eSwabs, at least 0.3-100 CFU MRSA cm-2 and 5.3-8.6 CFU MSSA cm-2 should be present. The sensitivities of pre-moistened eSwabs were approximately 10-fold higher than those of dipslides and pre-moistened viscose and cotton swabs. The variation in concentrations of Staphylococcus species in replicate sampling of adjacent squares on indoor surfaces was higher for surfaces frequently touched by hands than for surfaces infrequently touched. In total 16 different Staphylococcus species were identified, and S. aureus was found only in 2 of 66 surface samples. A considerable overlap was found between species in replicate sampling within an environment and between the air and surfaces within an environment.
Conclusions:
Pre-moistened eSwabs in combination with dilution plating were found to be the best method for surface sampling of MSSA and MRSA. The method can be used for assessing the risk of exposure and transmission of MRSA from environmental surfaces. To obtain a reliable measure of concentrations and the presence of Staphylococccus species a higher number of samples should be taken from surfaces with hand contact than from surfaces dominated by sedimented bacteria.
More Related Videos
Related Concept Videos
01:18Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
01:20Sputum Studies II: Culture and Sensitivity
Sputum culture and sensitivity is a medical procedure used to diagnose bacterial infections in the respiratory tract and select the most appropriate antibiotics for treatment. This process involves analyzing sputum samples of thick and opaque secretions produced in the lungs and airways. These samples are collected from patients and then sent to the laboratory for analysis.
The test can identify various pathogens responsible for respiratory infections, including Streptococcus,...