Related Experiment Video
Updated: Dec 8, 2025

Sandy Soil Improvement through Microbially Induced Calcite Precipitation MICP by Immersion
Published on: September 12, 2019
Influence of coconut shell ash on workability, mechanical properties, and embodied carbon of concrete
Naraindas Bheel1, Santosh Kumar Mahro2, Adeyemi Adesina3
1Department of Civil Engineering, Hyderabad College of Science & Technology, Hyderabad, Pakistan.
Abstract:
The significant contribution of the carbon dioxide emission from the production of Portland cement which is the main binder used in concrete has called for an imminent need to find environmentally friendly materials as alternatives. The availability of large quantities of agricultural wastes such as coconut shell in most developing countries opens a pathway to explore how these materials can be recycled into concrete as the binder composition. The combustion of most solid agricultural wastes results in the production of ash which can be used to replace Portland cement as a binder in concrete. This paper presents the results from the experimental investigation of the effect of coconut shell ash on the workability, mechanical properties, and embodied carbon of concrete. A total of five mixtures were made with coconut shell ash replacing Portland cement up to 20%. Results from this paper showed that coconut shell ash can be incorporated into concrete mixtures to reduce its embodied carbon. A reduction in embodied carbon of about 15% was achieved when 20% of Portland cement was replaced with coconut shell ash. The incorporation of coconut shell ash into concrete mixtures also resulted in an increase in the mechanical properties up to 10% replacement of Portland cement. The compressive, tensile, and flexural strength of mixtures incorporating 10% coconut shell ash as replacement of Portland cement is 12%, 10%, and 9% higher than that of the control mixture without coconut shell ash.
More Related Videos
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
10:27A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Related Concept Videos
Workability of Concrete
Concrete's workability is determined by its resistance to internal forces that arise...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Impact Strength of Concrete
Effects of Air-entrainment in Concrete
Fatigue Strength of Concrete