Related Experiment Video
Updated: Dec 6, 2025

A Microfluidic Model of Biomimetically Breathing Pulmonary Acinar Airways
Published on: May 9, 2016
Modeling transient particle transport in transient indoor airflow by fast fluid dynamics with the Markov chain method
Wei Liu1, Twan van Hooff2,3, Yuting An4
1Division of Sustainable Buildings, Department of Civil and Architectural Engineering, KTH Royal Institute of Technology, Brinellvägen 23, Stockholm, 100 44, Sweden.
Abstract:
It is crucial to accurately and efficiently predict transient particle transport in indoor environments to improve air distribution design and reduce health risks. For steady-state indoor airflow, fast fluid dynamics (FFD) + Markov chain model increased the calculation speed by around seven times compared to computational fluid dynamics (CFD) + Eulerian model and CFD + Lagrangian model, while achieving the same level of accuracy. However, the indoor airflow could be transient, if there were human behaviors involved like coughing or sneezing and air was supplied periodically. Therefore, this study developed an FFD + Markov chain model solver for predicting transient particle transport in transient indoor airflow. This investigation used two cases, transient particle transport in a ventilated two-zone chamber and a chamber with periodic air supplies, for validation. Case 1 had experimental data for validation and the results showed that the predicted particle concentration by FFD + Markov chain model matched well with the experimental data. Besides, it had similar accuracy as the CFD + Eulerian model. In the second case, the prediction by large eddy simulation (LES) was used for validating the FFD. The simulated particle concentrations by the Markov chain model and the Eulerian model were similar. The simulated particle concentrations by the Markov chain model and the Eulerian model were similar. The computational time of the FFD + Markov chain model was 7.8 times less than that of the CFD + Eulerian model.
More Related Videos
Related Concept Videos
Accelerating Fluids
The motion of the liquid within this infinitesimal cylinder is considered to obtain the pressure difference. Three vertical forces act on this liquid:
Laminar Flow: Problem Solving
Turbulent Flow: Problem Solving
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures enhance...
Turbulent Flow
Laminar and Turbulent Flow
Bernoulli's Equation for Flow Along a Streamline

