Selective separation and inexpensive purification of paclitaxel based on molecularly imprinted polymers modified with...

Paclitaxel (PTX) is a powerful anticancer natural product, with its separation and purification having been widely studied. In this work, new molecular imprinted polymers (MIPs) using deep eutectic solvents (DESs) with different molar ratios were prepared as functional monomers. These were then used as adsorbents in solid phase extraction (SPE) for the separation of PTX from its structural analogs. The polymers were characterized by energy disperive X-rays (EDX), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and fourier transform infrared spectroscopy (FT-IR). The results suggested that the formative regular DES-MIPs had an even pore-size distribution and a large specific surface area. The dynamic adsorption and static adsorption showed that the DES-MIPs had excellent adsorption performance, with a maximum adsorption capacity and optimum adsorption time of 87.08 mg/g and 180 min, respectively. The selective adsorption experiments showed that the material had outstanding selectivity, and the maximum selectivity factor was 6.20. For stability, after six consecutive adsorption and desorption cycles, the DES-MIPs maintained the perfect stability and reusability. Furthermore, the fabricated SPE column was successfully utilized for extracting and eluting PTX. This study provides a reliable protocol for the separation and purification PTX from its structural analogs and the DES-MIPs materials have excellent potential application value in pharmaceutical industry.