Adaptive Finite-Time Neural Network Control of Nonlinear Systems With Multiple Objective Constraints and Application
Abstract:
This article investigates an adaptive finite-time neural control for a class of strict feedback nonlinear systems with multiple objective constraints. In order to solve the main challenges brought by the state constraints and the emergence of finite-time stability, a new barrier Lyapunov function is proposed for the first time, not only can it solve multiobjective constraints effectively but also ensure that all states are always within the constraint intervals. Second, by combining the command filter method and backstepping control, the adaptive controller is designed. What is more, the proposed controller has the ability to avoid the "singularity" problem. The compensation mechanism is introduced to neutralize the error appearing in the filtering process. Furthermore, the neural network is used to approximate the unknown function in the design process. It is shown that the proposed finite-time neural adaptive control scheme achieves a good tracking effect. And each objective function does not violate the constraint bound. Finally, a simulation example of electromechanical dynamic system is given to prove the effectiveness of the proposed finite-time control strategy.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Control Systems
At the heart...
Electro-mechanical Systems
A key component of the DC motor is the armature, a rotating circuit positioned within a magnetic field. As an electric current passes through the...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...

