Related Experiment Video
Updated: Dec 5, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Prescribed Performance Quantized Tracking Control for a Class of Delayed Switched Nonlinear Systems With Actuator
Abstract:
This article proposes a prescribed adaptive backstepping scheme with new filter-connected switched hysteretic quantizer (FCSHQ) for switched nonlinear systems with nonstrict-feedback structure and time-delay. The system model is subjected to unknown functions, unknown delays, and unknown Bouc-Wen hysteresis nonlinearity. The coexistence of quantized input and actuator hysteresis may deteriorate the shape of hysteresis loop and, consequently, fail to guarantee the stability. To deal with this issue, a new FCSHQ is introduced to smooth the input hysteresis. This adaptive filter also provides us a degree of freedom at choosing the desired communication rate. The repetitive differentiations of virtual control laws and existing a lot of learning parameters in the neural network (NN)-based controller may result in an algebraic loop problem and high computational time, especially in a nonstrict-feedback form. This challenge is eased by the key advantage of NNs' property where the upper bound of the weight vector is employed. Then, by an appropriate Lyapunov-Krasovskii functional, a common Lyapunov function is presented for all subsystems. It is shown that the proposed controller ensures the predefined output tracking accuracies and boundedness of the closed-loop signals under any arbitrary switching. Finally, the proposed control scheme is verified on a practical example where simulation results demonstrate the effectiveness of the proposed scheme.
More Related Videos
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Phase-lead and Phase-lag Controllers
Time and frequency -Domain Interpretation of PI Control
Acting as a low-pass filter, the PI controller slows the system's response and extends settling times. This requires...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Time and frequency -Domain Interpretation of Phase-lag Control
Phase-lag controllers do not place a pole at zero, but instead influence the steady-state error by amplifying any...