Effects of dust dispersibility on the suppressant enhanced explosion parameter (SEEP) in flame propagation of Al dust...

This work presents an overview about the suppressant enhanced explosion parameter (SEEP) phenomenon in aluminum dust explosion moderation. The SEEP phenomenon can be attributed to either the flammable gas produced by decomposition of insufficient chemical suppressant so as to form an explosible hybrid mixture, or to the improvement in dust dispersibility caused by small amounts of thermal inhibitor so as to form better dispersed dust clouds. Aluminum (Al) and four particle sizes of alumina (Al₂O₃) were used to confirm a physically caused SEEP phenomenon by performing flame propagation experiments. Higher flame spread velocities (FSVs) in Al dust clouds were found in the presence of 5 or 10% <150 and <45-µm Al₂O₃ powder. Adding micro-sized Al₂O₃ disrupted inter-particle contact in combustible dusts, decreased inter-particle forces, and formed dust clouds with better dispersibility, thereby decreasing the effective particle size distribution (PSD) of Al dust. A strong thermal effect brought about by 2.5 µm Al₂O₃ overcame the negative effect of improved dispersion, preventing SEEP from occurring. The addition of 50 nm Al₂O₃ increased cohesion of powder mixtures, and decreased dust dispersibility. With benefits from both dispersion suppression and the thermal effect, Al flame propagation was well quenched.