Prescribed Performance Adaptive Neural Compensation Control for Intermittent Actuator Faults by State and Output
Abstract:
Due to the existing effects of intermittent jumps of unknown parameters during operation, effectively establishing transient and steady-state tracking performances in control systems with unknown intermittent actuator faults is very important. In this article, two prescribed performance adaptive neural control schemes based on command-filtered backstepping are developed for a class of uncertain strict-feedback nonlinear systems. Under the condition of system states being available for feedback, the state feedback control scheme is investigated. When the system states are not directly measured, a cascade high-gain observer is designed to reconstruct the system states, and in turn, the output feedback control scheme is presented. Since the projection operator and modified Lyapunov function are, respectively, used in the adaptive law design and stability analysis, it is proven that both schemes can not only ensure the boundedness of all closed-loop signals but also confine the tracking errors within prescribed arbitrarily small residual sets for all the time even if there exist the effects of intermittent jumps of unknown parameters. Thus, the prescribed system transient and steady-state performances in the sense of the tracking errors are established. Furthermore, we also prove that the tracking performance under output feedback is able to recover the tracking performance under state feedback as the observer gain decreases. Simulation studies are done to verify the effectiveness of the theoretical discussions.
More Related Videos
06:58A Structured Rehabilitation Protocol for Improved Multifunctional Prosthetic Control: A Case Study
Published on: November 6, 2015
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
Related Concept Videos
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Control Systems
At the heart...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
PI Controller: Design
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
