Related Experiment Video
Updated: Jul 19, 2026

Generic Protocol for Optimization of Heterologous Protein Production Using Automated Microbioreactor Technology
Published on: December 15, 2017
Response Surface Methodology optimization of chito-protein synthesized from crab shell in treatment of abattoir
Chinenye Faith Okey-Onyesolu1, E C Chukwuma2,3, C C Okoye1
1Department of Chemical Engineering, Nnamdi Azikiwe University, Awka, Nigeria.
Abstract:
Abattoir wastewater generated from various meat processing operations in several developing countries pose a serious threat to the environment. Consequently, there is urgent need to reduce the impact of environmental pollution from it. Coagulation techniques have been recommended and used by many researchers successfully in treating wastewater, therefore an investigation of possible use of chito-protein extracted from crab shell (locally sourced) was used as a coagulant for treating abattoir wastewater. Coagulation experiments were carried out using jar-test procedure to investigate the influence of pH, time of settling, temperature and adsorbent dosage for coagulation of BOD, COD, Turbidity and Colour from the wastewater sample. To determine the interaction effect of the various process variables, Response Surface Method (RSM) was used in the optimization of the process variables. To determine the effectiveness of the coagulant, pre and post characterization of the wastewater samples were undertaken, the result of the post characterization of the wastewater sample indicated that most of the water quality parameters except Iron were within WHO standard. The Total Suspended Solid (TSS), for instance stood at 564.6 mg/L and 29 mg/L respectively for pre and post characterisation, the value of 29 mg/L of the post characterization was below the WHO recommended value of 30 mg/L. The predicted responses and the experimental values correlated significantly, an indicator that RSM optimization method used in this study is suitable in modelling the process variables. The result of the study further shows that optimum process variable is dependent on the solution pH (acidic), coagulant dosage of 2-3g, settling time of 25-30 min and operating temperature from 323K to 333K. The coagulant used in this study, when compared with previous studies have shown to have strong potential for use as a coagulant and as an alternative to chemical coagulants in the treatment of abattoir wastewater.
More Related Videos
09:28Process Optimization using High Throughput Automated Micro-Bioreactors in Chinese Hamster Ovary Cell Cultivation
Published on: May 18, 2020
09:16Author Spotlight: Optimization of Processing Technology for Tiebangchui with Zanba Based on CRITIC Combined with Box-Behnken Response Surface Method
Published on: May 12, 2023
Related Concept Videos
Microbial Wastewater Treatment
Biological Treatment of Effluent and Waste Water