Related Experiment Video
Updated: Dec 3, 2025

Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method
Published on: June 14, 2019
The Shape of Heavy Droplets on Superhydrophobic Surfaces
Yang Yu1,2, Cunjing Lv3, Lifeng Wang2
1Department of Mechanics, School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China.
Abstract:
An analytical model is developed to describe the shape of heavy droplets on solid surfaces with arbitrary wetting properties (corresponding to the contact angles ranging from 0 to 180°). This model, based on a surface of revolution by rotating two elliptic arcs, reduces to the ellipsoid model for a hydrophilic case. Experimental measurements are also conducted to verify the model. It shows that the mean curvature distribution of the developed model agrees well with that of real droplets on hydrophobic surfaces, even on superhydrophobic surfaces. For water droplets with a volume up to 1000 μL on superhydrophobic surfaces having a 162° contact angle, the errors of the predicted heights, maximum radius, and wetting radius using this model are less than 1.7%, which suggests the capability of this model in studying the wettability of heavy droplets. This model provides an accurate theoretical basis for designing and controlling the spread, transport, condensation, and evaporation of heavy droplets on superhydrophobic surfaces.
More Related Videos
Related Concept Videos
Surface Tension, Capillary Action, and Viscosity
The various IMFs between identical molecules of a substance are examples of cohesive forces. The molecules within a liquid are surrounded by other molecules and are attracted equally in all directions by the cohesive forces within the liquid. However, the molecules on the surface of a liquid are attracted only by about one-half as many molecules. Because of the unbalanced molecular attractions on the surface molecules, liquids contract to form a shape that minimizes the number...
Cohesion
On a...
Surface Tension of Fluid
Surface tension varies...
Excess Pressure Inside a Drop and a Bubble
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...
Colloids

