Production of MCM-41 Nanoparticles with Control of Particle Size and Structural Properties: Optimizing Operational...

The synthesis of Mobil Composition of Matter 41 (MCM-41) mesoporous silica nanoparticles (MSNs) of controlled sizes and porous structure has been performed at laboratory and pilot plant scales. Firstly, the effects of the main operating conditions (TEOS -Tetraethyl ortosilicate- addition rate, nanoparticle maturation time, temperature, and CTAB -Cetrimonium bromide- concentration) on the synthesis at laboratory scale (1 L round-bottom flask) were studied via a Taguchi experimental design. Subsequently, a profound one-by-one study of operating conditions was permitted to upscale the process without significant particle enlargement and pore deformation. To achieve this, the temperature was set to 60 °C and the CTAB to TEOS molar ratio to 8. The final runs were performed at pilot plant scale (5 L cylindrical reactor with temperature and stirring speed control) to analyze stirring speed, type of impeller, TEOS addition rate, and nanoparticle maturation time effects, confirming results at laboratory scale. Despite slight variations on the morphology of the nanoparticles, this methodology provided MSNs with adequate sizes and porosities for biomedical applications, regardless of the reactor/scale. The process was shown to be robust and reproducible using mild synthesis conditions (2 mL⋅min^-1 TEOS addition rate, 400 rpm stirred by a Rushton turbine, 60 min maturation time, 60 °C, 2 g⋅L^-1 CTAB, molar ratio TEOS/CTAB = 8), providing ca. 13 g of prismatic short mesoporous 100-200 nm nanorods with non-connected 3 nm parallel mesopores.