Related Experiment Video
Updated: Dec 3, 2025

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Published on: November 5, 2014
High Performance Tandem Solar Cells with Inorganic Perovskite and Organic Conjugated Molecules to Realize
Kun Lang1, Qiang Guo2, Zhangwei He3
1State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China.
Abstract:
All-inorganic halide perovskite solar cells (PerSCs) have achieved rapid development in recent years. However, limited by narrow absorption bands, the power conversion efficiency (PCE) of all-inorganic halide PerSCs lag behind the organic-inorganic hybrid ones. In this contribution, to expand their absorption spectra and enhance the PCE, tandem solar cells (TSCs) with inorganic perovskite and organic conjugated molecules are constructed, utilizing CsPbI2Br as an ultraviolet-visible light absorber and a PTB7-Th:IEICO-4F bulk-heterojunction (BHJ) active layer as a near-infrared light absorber. To physically and electronically connect the front and rear subcells, P3HT/MoO3/Ag/PFN-Br is introduced as an interconnecting junction. Finally, the TSCs exhibit a remarkably higher PCE of 17.24% compared to that of the single junction PerSCs (12.09%) and organic solar cells (OSCs) (10.89%). These results indicate that the combination of all-inorganic perovskite and a low bandgap organic active layer for TSCs is a feasible approach to realize broad spectra utilization and efficiency enhancement.
More Related Videos
06:49In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021
11:26Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light
Published on: September 12, 2014