Facile Approach to Fabricating Stretchable Organic Transistors with Laser-Patterned Ag Nanowire Electrodes

Stretchable electronics are poised to revolutionize personal healthcare and robotics, where they enable distributed and conformal sensors. Transistors are fundamental building blocks of electronics, and there is a need to produce stretchable transistors using low-cost and scalable fabrication techniques. Here, we introduce a facile fabrication approach using laser patterning and transfer printing to achieve high-performance, solution-processed intrinsically stretchable organic thin-film transistors (OTFTs). The device consists of Ag nanowire (NW) electrodes, where the source and drain electrodes are patterned using laser ablation. The Ag NWs are then partially embedded in a poly(dimethylsiloxane) (PDMS) matrix. The electrodes are combined with a PDMS dielectric and polymer semiconductor, where the layers are individually transfer printed to complete the OTFT. Two polymer semiconductors, DPP-DTT and DPP-4T, are considered and show stable operation under the cyclic strain of 20 and 40%, respectively. The OTFTs maintain electrical performance by adopting a buckled structure after the first stretch-release cycle. The conformability and stretchability of the OTFT is also demonstrated by operating the transistor while adhered to a finger being flexed. The ability to pattern highly conductive Ag NW networks using laser ablation to pattern electrodes as well as interconnects provides a simple strategy to produce complex stretchable OTFT-based circuits.