Related Experiment Video
Updated: Dec 2, 2025

A Method for Growing Bio-memristors from Slime Mold
Published on: November 2, 2017
Self-rectifying resistance switching memory based on a dynamic p-n junction
Changjin Wu1,2, Xiaoli Li3, Xiaohong Xu3
1Department of Physics and Oxide Research Center, Hankuk University of Foreign Studies, Yongin 17035, Republic of Korea.
Abstract:
Although resistance random access memory (RRAM) is considered as one of the most promising next-generation memories, the sneak-path issue is still challenging for the realization of high-density crossbar memory array. The integration of the rectifying effect with resistance switching has been considered feasible to suppress the sneaking current. Herein, we report a self-rectifying resistance switching (SR-RS) by a newly discovered Li ions migration induced dynamic p-n junction at the Li-doped ZnO and ZnO layer interface. The Au/Li-ZnO/ZnO/Pt structure exhibits a forming-free and stable resistance switching with a high resistance ratio of R OFF/R ON ∼ 104 and a large rectification ratio ∼106. In the Li-ZnO/ZnO bilayer, the electric field drives the dissociation and recombination of the self-compensated [Formula: see text] complex pairs ([Formula: see text] p-type substitutional defect; [Formula: see text] n-type interstitial defect) through the transport of [Formula: see text] between the two layers, thereby induces the formation of a dynamic p-n junction. Using this structure as a memory stacking device, the maximum crossbar array size has been calculated to be ∼16 Mbit in the worst-case scenario, which confirms the potential of the proposed device structure for the selection-device free and high-density resistance random access memory applications.
More Related Videos
Related Concept Videos
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
P-N junction
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...

