Related Experiment Video
Updated: Dec 2, 2025

Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light
Published on: September 12, 2014
Integration of Microstrip Slot Array Antenna with Dye-Sensitized Solar Cells
Bowen Bai1, Zheng Zhang1, Xiaoping Li1
1The Key Laboratory of Information and Structure Efficiency in Extreme Environment, The Ministry of Education of China, and The School of Aerospace Science and Technology, Xidian University, Xi'an 710071, China.
Abstract:
This paper describes the integration of microstrip slot array antennas with dye-sensitized solar cells that can power array antennas at 5.8 GHz, ensuring normal communications. To appraise the antennas, a 2 × 2 circularly polarized microstrip slot array antenna integrated with dye-sensitized solar cells using a stacked design method was analyzed, fabricated and measured. The size of the entire array is 140 mm × 140 mm, where the size of each solar cell is 35 mm × 35 mm. The results show that the effect of the antenna has a slight influence on the output performance of the solar cells, and the interference of the output current of the solar cells to the antenna feeding system is negligible. The gain of the array antenna increases by 0.12 dB and the axial ratio is reduced to 1.50 dB after the integration of dye-sensitized solar cells. The integration saves a lot of space, and has the ability of self-sustaining power generation, thus providing reliable and long-term communication for various communication systems.

