Octenyl succinylation of kefiran: Preparation, characterization and functional properties

In this study, kefiran was esterified with octenyl succinic anhydride (OSA). The esterification reaction variables including pH (8.5), kefiran concentration (5% (w/w)), OSA concentration (12% (w/w)), temperature (~38 °C) and reaction time (~80 min) were found as optimum points to achieve the maximum degree of substitution (DS) (0.041 ± 0.002). Kefiran-OSA samples with DS of 0.021 (FDA suggested DS) and 0.041 (maximum DS) were prepared and compared with unmodified kefiran in all experiments. FTIR and ¹H NMR spectroscopies proved the grafting of OSA on kefiran structure. XRD analysis revealed that with increase in DS, the physical state of kefiran to be more amorphous. In addition, the esterification modification led to a decrease in the degradation temperature and an increase in the apparent viscosity based on the obtained data from thermal analysis and viscosity measurement. The results of the foaming and emulsifying properties confirmed the improvement in surface properties of the modified kefiran. The frequency sweep test illustrated that with an increase in DS, the viscoelastic behavior of the kefiran cryogels to be more viscous. It can finally be stated that the modification with OSA was a high potential strategy to extend the industrial applications of the kefiran.