Related Experiment Video
Updated: Dec 1, 2025

Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
COMPARISON OF RADON MASS EXHALATION RATE MEASUREMENTS FROM BUILDING MATERIALS BY TWO DIFFERENT METHODS
Sandra Soares1,2,3, Joaquim Kessongo1,2,3, Yoenls Bahu1,2,3
1Departamento de Física, Faculdade de Ciências, Universidade da Beira Interior, Rua Marquês d'Ávila e Bolama, 6201-001 Covilhã, Portugal.
Abstract:
The aim of this study is to measure the radon mass exhalation rate from common granite building materials used in the east and northeast part of Portugal. Twelve cubic shaped samples were measured. Nine of them without any coating and three coated with different materials (varnish, hydrorepellent and liquid silicone). The radon measurements were performed with two different techniques: one using passive detectors and other using an active detector. For the passive method, CR-39 solid-state nuclear track detectors were used. The active method used the RAD7 DURRIDGE detector. Radon mass exhalation rates obtained from both methods present relatively low values in the 11-45 mBq kg-1 h-1 range for the analysed samples. Concerning the coated samples, the measured values are on average four times lower than the ones without coating. Overall, the measured values for both methods present a good agreement.
Related Concept Videos
Measurement of Air Content in Concrete
The pressure method,...
One-Compartment Open Model: Wagner-Nelson and Loo Riegelman Method for ka Estimation
On...
Assessment of Ventilation I: Respiratory Rate
A Ventilation assessment is critical for monitoring a patient's health status. Respiration, one of the most accessible vital signs, provides insights into the function of numerous body systems and can indicate serious health issues, such as brainstem injuries from head trauma.
Critical Guidelines for Assessing Ventilation:

