Iron-Montmorillonite-Cyclodextrin Composites as Recyclable Sorbent Catalysts for the Adsorption and Surface Oxidation...

Iron-clay-cyclodextrin composites were designed as sorbent catalysts to adsorb and oxidize pollutants from water. The clay-iron backbone served as a mechanical support and as a heterogeneous Fenton catalyst, and the cyclodextrin monomers or polymers cross-linked with polyfluorinated aromatic molecules were used to accommodate adsorption of the pollutants. The composite based on iron-clay-cyclodextrin-polymers (Fe-MMT-βCD-DFB) exhibited superior adsorption and degradation of the model pollutants, bisphenol A (BPA), carbamazepine (CBZ), and perfluorooctanoic acid (PFOA), compared to the monomer-based composite and the native iron clay. The variety of adsorption sites, such as the polyfluorinated aromatic cross-linker, cyclodextrin toroid, and iron-clay surface, resulted in high adsorption affinity toward all pollutants; BPA was primarily adsorbed to the cyclodextrin functional groups, CBZ showed high affinity toward the Fe-MMT surface and the Fe-MMT-βCD-DFB composite, whereas PFOA was adsorbed mainly to the βCD-DFB polymer. Degradation, using H₂O₂, was highly efficient, reaching over 90% degradation in 1 h for BPA and CBZ and ∼80% for PFOA. The composite also showed excellent degradation efficiency in a multicomponent system with all three model pollutants. Furthermore, the composite's activity remained steady for five consecutive cycles of adsorption and degradation. The ability to remediate a broad range of pollutants, and the high overall removal exhibited by this novel material, demonstrates the potential for future application in water remediation technologies.