Related Experiment Video
Updated: Nov 30, 2025

Tracking the Mammary Architectural Features and Detecting Breast Cancer with Magnetic Resonance Diffusion Tensor Imaging
Published on: December 15, 2014
An Investigation of Slot-scanning for Mammography and Breast CT
Andrew F T Leong1, Grace J Gang1, Alejandro Sisniega1
1Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD USA.
Abstract:
Mammography and breast CT are important tools for breast cancer screening and diagnosis. Current implementations are limited by scattered radiation and/or spatial resolution. In this work, we propose and develop a slot scan-based system to be used in both mammography and CT mode that can limit scatter and collect sparse CT data for improved image quality at low radiation exposures. Monte Carlo simulations of an anthropomorphic breast phantom show a factor of 10 reduction in scattering amplitude with our slot scan-based system compared to that of a full-field detector mammography system (area mode). Similarly, slot-scan improved the MTF (particularly the low-frequency response) compared to an area detector. Investigation of sparse CT sampling with doubly sparse acquisition data return better quality reconstruction, for which our slot-scanning system is capable, over angle-only projection. Thus, a system with the combined ability for slot-scanning mammography and slot-scanning breast CT has the potential to deliver improved dose-efficient imaging performance and become viable breast cancer screening and diagnostic tools.
More Related Videos
13:44Detection of Architectural Distortion in Prior Mammograms via Analysis of Oriented Patterns
Published on: August 30, 2013
11:31Using Micro-computed Tomography for the Assessment of Tumor Development and Follow-up of Response to Treatment in a Mouse Model of Lung Cancer
Published on: May 20, 2016
Related Concept Videos
Radiological Investigation I: X-ray and CT
Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
Imaging Studies I: CT and MRI
Description of the Procedures
Computed Tomography (CT) scan:
Computed Tomography (CT) scans use X-ray technology to generate detailed images of bones, organs, and tissues. During the scan, the patient lies on a moving table...
Imaging Studies for Cardiovascular System V: CT
Radiological Investigation III: Pulmonary Angiogram and PET Scan
Pulmonary Angiogram
A Pulmonary Angiogram is an invasive procedure involving injecting a contrast medium through a catheter threaded into the pulmonary artery or the right side of the heart to visualize the pulmonary vasculature. Computed Tomography (CT) scans have mainly replaced this...
Radiological Investigation II: MRI and Ventilation Perfusion Scan
Magnetic Resonance Imaging (MRI) and Ventilation Perfusion Scans are two radiological investigations that offer detailed diagnostic images of the body, particularly lung structures.
MRI
MRI uses magnetic fields and radiofrequency signals to distinguish between normal and abnormal tissues. This technology provides a more detailed diagnostic image than CT scans, enabling it to characterize pulmonary nodules, stage bronchogenic carcinoma, and evaluate inflammatory activity in...