State-estimation-based adaptive sliding mode control of uncertain switched systems: A novel linear sliding manifold
1School of Automation, Qingdao University, Qingdao 266071, China; Shandong Key Laboratory of Industrial Control Technology, Qingdao University, Qingdao 266071, China.
Abstract:
A new sliding mode observer design scheme is developed with a novel linear sliding manifold for the exponential stabilization problem of a class of uncertain switched systems in this note. Firstly, the linear sliding manifold is constructed based on a modified observer, through which a new technical approach of the underlying system analysis is exploited to devise a novel exponential stability criteria. Moreover, an associated adaptive switching controller is presented, by which the arrival condition of the designated sliding manifold is fulfilled. Ultimately, illustrative examples are conducted to confirm the feasibility of the proposed scheme.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
08:35Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
Related Concept Videos
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Multi-input and Multi-variable systems
In the absence of...
State Space Representation
Consider an RLC circuit, a...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
