Treating disinfection byproducts with UV or solar irradiation and in UV advanced oxidation processes: A review
Xin Lei1, Yu Lei1, Xinran Zhang1
1School of Environmental Science and Engineering, Guangdong Provincial Key Laboratory of Environmental Pollution Control and Remediation Technology, Sun Yat-sen University, Guangzhou 510275, China.
Abstract:
This review focuses on the degradation kinetics and mechanisms of disinfection byproducts (DBPs) under UV and solar irradiation and in UV-based advanced oxidation processes (AOPs). A total of 59 such compounds are discussed. The processes evaluated are low pressure, medium pressure and vacuum UV irradiation, solar irradiation together with UV/hydrogen peroxide, UV/persulfate and UV/chlorine AOPs. Under UV and solar irradiation, the photodegradation rates of N-nitrosamines are much higher than those of halogenated DBPs. Among halogenated DBPs, those containing iodine are photodegraded more rapidly than those containing bromine or chlorine. This is due to differences in their bond energies (EN-N < EC-I < EC-Br < EC-Cl). Molar absorption coefficients at 254 nm and energy gaps can be used to predict the photodegradation rates of DBPs under low pressure UV irradiation. But many DBPs of interest cannot be degraded to half their original concentration with less than a 500 mJ cm-2 dose of low pressure UV light. HO• generally contributes to less than 30% of the degradation of DBPs except iodo-DBPs in UV/H2O2 AOPs. Reaction mechanisms under UV irradiation and in HO•-mediated oxidation are also summarized. N-N bond cleavage initiates their direct UV photolysis of N-nitrosamines as C-X cleavage does among halogenated compounds. HO• generally initiates degradation via single electron transfer, addition and hydrogen abstraction pathways. Information on the reaction rate constants of SO4•- and halogen radicals with DBPs is rather limited, and little information is available about their reaction pathways. Overall, this review provides improved understanding of UV, solar and AOPs.
More Related Videos
14:17The Portable Chemical Sterilizer PCS, D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
08:23Analyzing the Photo-oxidation of 2-propanol at Indoor Air Level Concentrations Using Field Asymmetric Ion Mobility Spectrometry
Published on: June 14, 2018
Related Concept Videos
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Chemical Agents for Microbial Control
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Bioremediation
Radical Autoxidation
