Related Experiment Video
Updated: Nov 30, 2025
Disentangling High Strength Copolymer Aramid Fibers to Enable the Determination of Their Mechanical Properties
Published on: September 1, 2018
Mechanical Properties of Polymer Coatings Applied to Fabric
Serhiy Horiashchenko1, Janusz Musiał2, Kostyantin Horiashchenko1
1Khmelnitskiy National University, st Institutskaya st. 11, 29016 Khmelnitskiy, Ukraine.
Abstract:
The polymer film, formed on fabric, has a diverse resistance to impact (shear) forces during deformation. An original model of the capillary-porous structure of the fabric, partially filled with polymer, was presented and discussed in this paper. Polymer material fixing relations were developed, taking into account the fabric structure and changes of polymer temperature. Experimental studies were performed on three different materials: artificial leather SK-2, GOST 16119-70 (230 g/m2); genuine beef skin, GOST 939-75 (2.2 g/m3); and fabric denim, GOST 29298-2005 (225 g/m2). The value of mathematical model analysis deviation compared with the experimental value was approximately 12%. The obtained mathematical dependences were the basis for predicting the increase of the dimensional stability of garments by applying hot melt polymer to its surface. It is also possible to design new equipment for its implementation.
Related Concept Videos
01:20Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
01:21Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...