Effect of waterproof breathable membrane based cathodes on performance and biofilm microbiomes in bioelectrochemical...

A novel method for fabricating air-cathodes was developed by assembling an activated carbon (AC) catalyst together with a waterproof breathable membrane (WBM) and stainless steel mesh (SSM) to reduce manufacturing costs of bioelectrochemical systems (BESs). WBMs made of different materials were tested in the assembly, including a hybrid of polypropylene and polyolefin (PPPO), polyethylene (PE), and polyurethane (PU), and compared against poly tetrafluoroethylene (PTFE)-based cathodes. Results showed that the maximum power density of the activated carbon-stainless steel mesh-polyurethane (AC@SSM/PU) assembly was 2.03 W/m² while that of conventional carbon cloth cathode assembly (Pt@CC/PTFE) was 1.51 W/m². Compared to conventional cathode fabrication, AC@SSM/PU had a much lower cost and simpler manufacturing process. Illumina Miseq sequencing of 16S rRNA gene amplicons indicated that microbiomes were substantially different between anode and cathode biofilms. There was also a difference in the community composition between different cathode biofilms. The predominant population in the anode biofilms was Geobacter (38-75% relative abundance), while Thauera and Pseudomonas dominated the cathode biofilms. The results demonstrated that different types of air-cathodes influenced the microbial community assembly on the electrodes.