Experimental Evidence and Characteristic Recognition of the Nanoweakening of Slip Deformation Zones

A central issue in the study of fault evolution is to identify shear weakening and its mechanism; currently, studies of fault weakening in narrow slip deformation zones, including those of various slipping planes such as schistosity, foliation, cleavage, joints and faults in rocks, are ongoing. To verify the nanoweakening in shear slipping, we carried out experiments: triaxial compression experiments on sandstones and uniaxial compression experiments on granites. Furthermore, on the basis of scanning electron microscopy (SEM) observations and experimental data analyses, we suggested three kinds of nanoweakening in terms of the corresponding strain stages: (1) The slip nanoweakening caused by the strain hardening deformation stage of the shear slip, which creates nanograins with dense coatings that may be due to the nanocoating on the shear planes, can result in rolling friction rather than with sliding friction, and the former is a principal mechanism of sliding nanoweakening. (2) The rheological nanoweakening caused by the strain softening deformation stage; in view of developing weakened deformation due to grain boundary migration (GBM), the flow of synkinematic minerals and melt coating phenomena lead to rheological nanoweakening. (3) The dynamic nanoweakening caused by thermal pressurization and fluid pressurization during the strain softening stage and strain degenerating stage. Thus, when these aspects are considered in defining the relationship between the nanoweakening at the slipping planes and the strain stages, the representative mechanism and its behavior rules can be obtained.