Related Experiment Video
Updated: Nov 29, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Element transfer by a vapor-gas stream from sulfide mine tailings: from field and laboratory evidence to
Svetlana Borisovna Bortnikova1, Nataliya Victorovna Yurkevich1, Olga Lukinichna Gaskova2
1Trofimuk Institute of Petroleum Geology and Geophysics, Siberian Branch of Russian Academy of Sciences, Koptug ave. 3, Novosibirsk, Russia, 630090.
Abstract:
Condensates of vapor-gas streams were collected during field and laboratory experiments for the determination of the volatility of chemical elements in sulfide tailings under ambient conditions. The object of research was the Ursk waste heaps (Kemerovo region, Russia). Field experiments were performed on the top of the heap and in neighboring territories; the elements' concentrations in condensates from the top exceed the background values in 2-3 orders of magnitude. To obtain condensates in the laboratory, the waste material was heated to 60 °С. Laboratory condensate-contended high concentrations Ca, Mg, but Fe, Cd, Mo, Sn, Zr, and W were lower by more than 2 orders of magnitude. Also, chemical elements such as Au, Zr, Cs, U, and Tl were determined in the laboratory condensates at elevated temperatures. Also, solid samples were leached with water at the laboratory. A high positive correlation of condensate compositions with compositions of water extracts obtained from parallel samples was established. The most mobile elements transferred in the steam-gas phase are alkaline (Li, Cs, Na, K), alkaline earth (Ca, Sr), chalcophile metals (Hg, Zn, Cu), and metalloids (As, Sb, Se). The numerical experiment of metal transfer forms using thermodynamic modeling methods has been performed, including those with organic ligands.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Atomic Absorption Spectroscopy: Atomization Methods
Volatilization
Precipitation and Co-precipitation
Washing, Drying, and Ignition of Precipitates

