High-Yielding Separation and Collection of Plasma from Whole Blood Using Passive Filtration

Lateral flow tests and hand-held analyzers facilitate diagnostic testing in resource limited settings and at the point-of-care. However, many of these devices require sample preparation such as plasma separation to remove cells and isolate the liquid portion of blood. Specifically, the separation of plasma from blood is necessary for routine health assessments such as comprehensive metabolic panels and chronic HIV viral load monitoring. Away from laboratories, this type of processing has been addressed by unconventional, hand-operated centrifuge devices (high volume) or plasma separation membranes (PSM) coupled with lateral flow tests (low volume). Herein, we describe a device that separates and stores plasma from undiluted blood using only passive filtration in less than 10 min. Integrating a PSM with a prefilter and absorbent material yields a 3-fold increase in separation efficiency compared to similar devices using passive filtration. We demonstrate the reproducibility of our device across the physiological range of hematocrits (20-50%) with an average recovered plasma volume of 61.7 ± 2.6 μL. Maximum separation efficiency (53.8%, 65.6 ± 3.9 μL plasma) was achieved for a sample of whole blood (30% hematocrit) in 10 min. We evaluate the purity of our plasma sample by quantitation of hemoglobin and report hemolysis as either minimal (≤5%) or undetectable (≤1%). Specific recovery of human IgG, IFN-γ, and HIV-1 RNA indicate the diagnostic utility of plasma obtained from our device is unchanged compared to plasma obtained via centrifugation. Finally, we demonstrate the use of recovered plasma, applied via "stamping", to successfully conduct a commercial lateral flow immunochromatographic assay for tetanus antibodies. This device platform is capable of producing pure plasma samples from blood to facilitate tests in resource limited settings to improve access to healthcare.